...
The magnetic switch is designed to detect the position of various technologically importan...
Measuring-control system MPS-11D-NG is electronic device for measuring the physical values...
Portable gas detector Vohljač is designed for measuring of explosive gases (propane, butan...
Measuring-control system MPS-03-NG is electronic device for measuring the physical values ...
GasBadge Pro is single gas monitor ideal for personal protection from unsafe levels toxic...
Measuring-control system MPS-05-NG is electronic device for measuring the physical values ...
MX6 is a portable gas monitor capable of continuously and simultaneously monitoring up to ...
Measuring-control system MPS-06-NG is electronic device for measuring physical values - ca...
The MX4 is small, rugged and simple to use. It’s an ideal personal monitor to use. This to...
Measuring-control system MPS-09-NG is electronic device for measuring the physical values ...
The PS200 Series detects all possible combinations of LEL, O 2 , CO, H 2 S, including sing...
Measuring-control system MPS-07-NG is electronic device for measuring the physical values ...
The PS1 monitors a single gas, for a variety of applications. Widely used in the oil and g...
The LogiCO2 Scout – Low cost, pocket-sized and measure CO 2 remotely. The revolutionary L...
Measuring-control system MPS-08-NG is electronic device for measuring the physical values ...
The PS500 can be tailored to detect up to five gases with its toxic and catalytic sensors,...
Measuring-control system MPS-02-NG is electronic device for measuring the physical values ...
The Protege ZM Single Gas Monitor is an easy-to-use, zero-maintenance gas detection soluti...
Measuring-control system MPS-10-NG is electronic device for measuring the physical values ...
The PPI 100E level meter is submersible and is designed to measure fluid levels. The leve...
Alarm unit MDK alarm is device for measurement of air quality in shelters. It continuously...
Level probe controller KNS is designed for continuous control of level in liqiud tanks. Le...
The measuring-control system MPS-01-NG is an electronic device for measuring the physical ...
The alarm unit type MX 2000 is designed for continuous control of explosive gases and vap...
The measuring-control system MPS-06-NG/H2S is an electronic device for measuring the physi...
The alarm unit type MX 5000 is designed for continuous control of explosive gases and vapo...
The measuring-control system MPU-01 is an electronic device for measuring the physical amo...
The alarm unit type MX 6000 is designed for continuous control of explosive gases and vapo...
Measuring-control system MPU-02 is electronic device for measuring the physical values -...
GALAXY MX7 is integrated Control and Alarm System, microprocessor controlled, mainly used ...
Measuring-control system MPU-03 is electronic device for measuring the physical values - c...
MK9 CO 2 Safety system The MK9 CO 2 sensor is the latest generation of CO 2 Safety S...
Measuring-control system MPU-04 is electronic device for measuring physical values - carbo...
We believe that sensors should have as little service as possible over its lifespan. We th...
Measuring-control system MPU-05 is electronic device for measuring the physical values - o...
Level probe NS can be used for signalling minimal or maximal levels of liquids in differen...
The measuring-control system MPU-06 is an electronic device for measuring the physical amo...
Sensor measuring head S-JP/K is made of aluminous housing, which is mounted on plastic hou...
Measuring-control system MPU-07 is electronic device for measuring physical values - hydro...
Description, application of CO-CAN and CO-I sensors Sensors CO-CAN and CO-I are designe...
Measuring-control system MPU-08 is electronic device for measuring the physical values - p...
The detection of toxic gases or lack of oxygen requires the installation of detectors sati...
Measuring-control system MPU-09 is electronic device for measuring the physical values - d...
Sensor S-JP Ex is build in Ex protection type EEx de. It is universal and easy for setting...
Measuring-control system MPU-10 is electronic device for measuring the physical values - t...
Infrared transmitter detector OLCT IR is device for measuring of explosive gases for use i...
Measuring-control system MPU-11 is electronic device for measuring the physical values - r...
Sensor measuring head S-JP/H is made up of aluminous housing, which is mounted on plastic ...
Measuring-control system MPU-12 is electronic device for measuring the physical values - a...
The measuring head, OLCT100, is designed to measure explosive and toxic gases and vapours ...
Spare parts are available for the following Measuring-control system MPS: Methane se...
Fixed Gas Detector 4-20 mA analog output Basic (low cost) detector for industrial applic...
Intelligent Fixed Gas Detector 4-20 mA current output Optional RS-485 Modbus RTU communic...
Fixed Ambient Temperature Monitor and/or Relative Humidity Monitor 4–20 mA current output ...
Fixed Temperature Monitor with Dislocated Probe 4–20 mA current output Optional RS-485 Mod...
Fixed Liquid Level Meter (also suitable for corrosive and aggressive liquids) 4–20 mA c...
Fixed Wind Speed and Wind Direction Meter 4–20 mA current output (one type measurement) ...
Gas detector type of DEG-2(R) and type of DTG-2(R) are intended for detection of explo...
Alarm hooter AS-230/2 is device for audible warning in case of alarm events. Its robust bu...
Alarm hooter ASB12-24 is device for audible and visual warning. The device is suitable for...
Double sided visual warning board is designed for visual and audible warning. The device i...
Signal LED flashing light SB-XX-Ex/X is intended for visual signalization of alarm states ...
Signal Flash Light with Alarm Horn (Zone 1 and 2) Flameproof enclosure, direct entry Op...
Signal tower type TWS-HS/01 provides an important visual signal of, for example, status ch...
Signal tower with siren type TWS-HS/02 provides an important visual signal of, for example...
Signal light TE-xx/Ex is intended for LED optical signalization of different alarm or tech...
Signal light TE-xx is intended for LED optical signalization of different alarm or technol...
Construction Enclosure: PA glass fiber reinforced polyamide, color – black Cover: P...
Construction Enclosure: SMC glass fiber reinforced polyamide, color – black Cover: ...
Construction Enclosure: Stainless steel AISI 316L, brush finished, thickness 1.5mm C...
Construction Enclosure: polyester plastic reinforced with glass fiber, color – black ...
Construction Polyamide body / neoprene gasket Zone 1, 2, 21, 22 Ex e plastic c...
Construction Enclosure: PA cover Multi-core bushing: brass nickel plated (SS AISI 3...
Construction Socket/ 2P – 2P+E – 3P: polycarbonate Socket / 3P+E – 3P+N+E: SMC Zo...
Insulation control unit type KI-302 is used to control insulation resistance to earth (PE)...
The submersible pump controller KPC-2 is designed for controlling submersible pumps. The f...
The phase controller KF-2 is designed for controlling of motor power supply 3-phase system...
The main feature of the camera type CAMNO-01-IP/FO is robust housing with IP54 mechanical ...
Multifunction portable gas detector type INEP-Z is portable micro-controlled device used...
Gas monitoring system is designed for measuring physical parameters in underground coal mi...
Application, description Sudden exhausts and outbursts of methane and other poisonous g...
Data capture station The RTU-40 is a central unit designed for simple monitoring and co...
Power supply type LN-xxx-12ia is designed for use in mining applications. It converts an A...
Power supply type NSB-xxx-ia is designed for use in mining applications. It converts an AC...
Power supply type NSB2/xx is designed for use in underground mining applications. It conve...
Power supply type NSB3-xxx/5Via is intended for use in mining applications. It will conver...
The FAR-V20 power supply has been designed for powering mining fieldbuses and critical dat...
Intrinsic safe signal flashing light with horn type SBH-X-Exia is intended for acoustic an...
Intrinsic safe signal horn type SH-1-Exia is intended for acoustic signalization of differ...
Intrinsic safe signal LED flashing light SB-X-Exia is intended for visual signalization of...
Intrinsic safe signal LED flashing light SB-XX-Exia is intended for visual signalization o...
Intrinsic safe multicolor LED flashing light SB-RGBW-Exia is intended for visual signaliza...
The LED traffic light is intended for signalling transport routes in underground mines.The...
The LED traffic light is intended for signalling transport routes in underground mines. Th...
Signal flash light with horn SBH-ia/PV is intended for use in mining applications. It is u...
Alarm horn AH-XXX-PEx is designed for audible signalling of alarm events. Because of it's...
Signal flash light with horn SBH-ia/MPS is intended for use in mining applications. It is ...
Junction box type RO-X-Ex ia is used for connection and distribution of intrinsically safe...
Distribution box type RO-X-Ex is intended for connection and distribution of energetic cir...
Optical cable bushing is one of the components of flameproof enclosure. It is used for tra...
Visor glass is a component of the flameproof enclosure. It is used for visual access to th...
The junction box type JB-0X-Exia (in INOX performance) is intended for connection and dist...
Wk - Pg (Pg threading) type bushings are used to connect cables or wires to Ex d enclosure...
Control separation element KLV-XXX-PEx is designed for transfer and galvanic separation of...
Data separation element PLV-XXX-PEx is designed for transfer and galvanic separation of da...
Blocking unit in the case of earth leakage, type ZZS 500/1000 Earth leakage indi...
A combination of a control disconnect circuit or a data disconnect circuit with a junction...
TPx-M fasteners are used for connecting electrical circuits in junction boxes in mining an...
Wk - M (metric threading) type bushings are used to connect cables or wires to Ex d enclos...
IP/Ex explosion proof camera type CAMEX-01-IP/FO is suitable for heavy working conditions ...
Specifications: 4 different lamp wattage options Utilizes latest T5 fluorescent ...
The LUX-xx-L / x.x mine reflector is intended for lighting in mines threatened by cave gas...
Construction Housing: SMC polyester plastic reinforced with glass fiber, color RAL 70...
The emergency fluorescent light fitting type PSF E is intended for use in places with an e...
Construction Housing: corrosion resistant grey polyurethanes painted aluminium Diffu...
Construction Housing: Epoxi/polyester powder-coated sheet steel Diffuser: flat boro...
Construction Housing: 0403.24/10 – aluminium powder painted casting, 0403.24/20 ...
Construction Housing: aluminium powder painted casting Diffuser: borosilicate glass...
Housing: SMC polyester plastic reinforced with glass fiber, color RAL 7038 Diffuser: P...
Construction Housing: aluminium profile powder painted casting Diffuser: borosilica...
Sensors CO-CAN GAR are designed for use in car parks. They are measuring concentration of ...
CANARY is an electronic device for detection of explosive gases (propane-butane and natura...
Domestic battery operated CO detector is designed to detect carbon monoxide from any sourc...
Alarm unit SP200U is designed for continuous control of explosive gases, alarming, valve c...
Alarm unit SP100 with gas sensor (explosive or toxic gas) represents ideal combination for...
CarCanary is an electronic device for the detection of explosive gases (LPG or car gases),...
SEND ENQUIRY