Domestic battery operated CO detector is designed to detect carbon monoxide from any source of combustion. It is not designed to detect smoke, fire or any other gas. CO detector will only indicate the presence of carbon monoxide gas at the sensor. Carbon monoxide may be present in other areas. A CO detector measures CO levels in the air. It will alarm if CO levels rise quickly (if the heat exchanger on your furnace breaks, for example), or if CO is consistently present (slow CO leak on a fuel-burning appliance).
This Carbon Monoxide Alarm features a permanently installed sensor and an 85 dB alarm horn. It also has a silence feature to temporarily quiet the alarm horn.The Silence Feature is for your convenience only and will not correct a CO problem. Always check your home for a potential problem after any alarm.
Failure to do so can result in injury or death. Never ignore your Carbon Monoxide Alarm if it alarms. Failure to do so can result in injury or death. Test the CO Alarm once a week. If the CO Alarm ever fails to test correctly, have it replaced immediately! If the CO Alarm is not working properly, it cannot alert you to a problem. This product is intended for use in ordinary indoor locations of family living units.
Installation
Where to install CO detector:
Install at least one CO detector near sleeping area
Install at least one CO detector on each level of the home
For added protection install an additional CO detector at least 1 m away from furnace or fuel burning source
In mobile homes install CO detector on inside walls
If your bedroom hallway is longer than 12 meters, install CO detector at both ends of the hallway
Produced according to EN 50291 standard.
Voice signal
85 dB
Power supply
3 x 1,5 V AA battery
Dimensions
14 x 6,1 x 14 cm
Weight
322 g
»Prejete podatke bomo uporabljali le za namen povpraševanja. Brez vašega soglasja prejetih podatkov ne bomo hranili, obdelovali ali posredovali tretjim osebam.«