Among the devices that can be linked to the integrated MX Galaxy Q-AIR system is the outdoor measuring unit, a stand-alone instrument for determining outdoor air quality parameters. Several specialized sensors are included in the device to measure particular air parameters. All sensors are connected to the ADW-16 measurement card. This has an integrated Wi-Fi module that allows data transfer and communication over a Wi-Fi network. Measured outdoor parameters:
Temperature (°C)
Humidity
Wind speed/direction
Air pressure
Carbon monoxide (CO)
Carbon dioxide (CO2)
PM2.5 particles
PM10 particles
UV radiation
Ozon
Supply:
Range:
Accuracy:
Response time:
Temperature sensor:
24 V
-40°C – +60°C
± 0.5°C (25°C)
<= 25 s
Humidity sensor:
24 V
0 %RH – 80 %RH
± 3 %RH (5 %RH – 95 %RH)
<= 8 s
Wind speed sensor:
24 V
0 m/s – 30 m/s
± 0.1 m/s
<= 0.5 s
Wind direction sensor:
24 V
8 stopenj
/
<= 0.5 s
Air pressure sensor:
24 V
0 kPa – 120 kPa
± 0.15 kPa
<= 1 s
Carbon monoxide sensor:
24 V
0 ppm – 100 ppm
± 5 %
<= 30 s
Carbon dioxide sensor:
24 V
0 ppm – 5000 ppm
± 5 %
<= 30 s
PM2.5 sensor:
24 V
0 ug/m3 – 6000 ug/m3
± 0.1 ug/m3
<= 9 s
PM10 sensor:
24 V
0 ug/m3 – 6000 ug/m3
± 0.1 ug/m3
<= 9 s
UV sensor:
24 V
0 mW/cm2 – 15 mW/cm2
± 10 % FS
<= 0.2 s
Ozone sensor:
24 V
0ppm – 100ppm
± 6 %FS
<= 35 s
»Prejete podatke bomo uporabljali le za namen povpraševanja. Brez vašega soglasja prejetih podatkov ne bomo hranili, obdelovali ali posredovali tretjim osebam.«
